Custom 3D Printed Camera Storage Box Protective Organizer Case Stackable Divider Tray For Sony Mirrorless Cameras

This storage box is a printed organizer case for Sony mirrorless bodies, lenses, batteries and memory cards. The interior divider tray is generated from your actual gear list, so every compartment matches the body, lens barrel and accessory dimensions instead of forcing the kit into a generic foam insert.

The case is built with a 2.5 mm printed wall, a reinforcing rib frame and a stackable interlock on the lid and base, so several boxes can be stacked on a shelf or loaded into a van without sliding. A 5 mm EPE foam lining and a TPU sealing lip keep dust and light rain away from the gear.

The removable divider tray lifts out with two finger notches, which lets the same box serve as a body case or a lens case. Because the tray is printed on demand, compartment count, depth and slot shape can be revised for a new camera body without a new mould.

• Mirrorless body and prime lens storage in a camera bag or dry cabinet
• Studio shelf organization for a rental house lens collection
• Travel kit packing with batteries, chargers and memory cards sorted
• Wedding and event crew van loading, stackable by camera body type
• Product photography studio accessory drawer organization
• Retail display tray for camera stores and second hand dealers

• Custom compartment layout generated from your gear list or a hand sketch
• Custom outer size, colour and material grade (PETG for humid rooms, PA-CF for high load)
• Logo engraved on the lid or embossed into the divider tray
• Custom label plate for slot naming, lens focal length or asset number
• Custom retail packaging with printed insert card

Each box is wrapped in a PE bag with EPE corner protection inside an individual carton, then loaded into an export grade master carton. Samples ship in 5 to 8 working days after the layout drawing is approved, bulk orders in 12 to 20 working days depending on quantity and finishing.

• Fine layer texture is normal on FDM printed parts; the painted version is sanded before coating.
• PLA softens above 60 degrees Celsius, choose PETG or PA-CF for a car or a hot storage room.
• Check the latch screws after long transport and keep the foam lining dry.
• Clean with a dry soft cloth; do not soak the printed shell in solvent or hot water.

Q1: Does the box fit all Sony mirrorless bodies?
A1: The standard tray is designed for common Sony E mount bodies with a prime or short zoom lens attached. Send your body and lens list and we adjust the slot dimensions before printing.

Q2: Is the divider tray removable?
A2: Yes. The tray lifts out with two finger notches, so one box can hold a camera body on one job and lenses on the next.

Q3: What is the minimum order quantity?
A3: One piece for the standard layout. Custom layouts, colours and logo engraving start from 20 pieces because a print profile and painting batch are set up per order.

Q4: Can you print from my own STEP or STL file?
A4: Yes. Send STEP, STL or a dimension sketch and our engineers check wall thickness, latch fit and printability before quoting.

Q5: Is it strong enough to stack?
A5: Four loaded boxes stack safely up to an 8 kg total load thanks to the interlock ribs and the 2.5 mm wall with four perimeters.

Q6: Do you offer OEM branding for resellers?
A6: Yes. Logo engraving, brand colour, label plate and custom carton are available on OEM orders.

Q7: Can the box be used for other camera brands?
A7: Yes. The layout is printed per order, so the same design can be re-dimensioned for other mirrorless or DSLR bodies.